Write the BIOS filename on a piece of paper. To set a User Password: You can now talk to your partners on the headphone while playing a multi-channel network games. Pin 5 on the connector is removed to prevent incorrect cable connection when using a FDD cable with a covered Pin 5. You can also find this information on the inside front cover of this user guide. Select OK to discard any changes and load the previously saved values.

Uploader: Tojalabar
Date Added: 2 December 2017
File Size: 17.67 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 13550
Price: Free* [*Free Regsitration Required]

If possible, disconnect all power cables from the existing system before you add a device. When set to Last State, the system goes into either off or on state, whatever the system state was before the AC power loss.

The default value of this item is auto-detected by BIOS. When no floppy disk is found, the utility automatically checks the optical drive for the original or updated BIOS file. Pin 5 on the awus is removed to prevent incorrect cable connection when using a FDD cable with a covered Pin 5. To install the CPU heatsink and fan 1.


Follow the screen instructions to complete the update process. If the system becomes unstable after changing any BIOS settings, load the default settings to ensure system compatibility and stability. Connect one end of the chassis intrusion sensor or switch cable to this connector. This is a reminder that you should shut down the p5kpl-a, and unplug the power cable before removing or plugging in any motherboard component.


These devices could interrupt the grounding circuit. Kan 9-pin COM1 port is for pointing devices or other serial devices. Line Out port lime. Clear User Password Select this item to clear the user password. The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component is removed or replaced. Remove the jumper caps only when you intend to use the chassis intrusion detection feature.

P5KPL-AM/PS | Motherboards | ASUS Global

When the system hangs due to overclocking, C. See Chapter 2 for details.

Enter text from picture: Load Setup Defaults This option allows you to load pp5kpl-am default values for each of the parameters on the Setup menus. This is in line with the ASUS vision of creating environment-friendly and recyclable products and packaging to safeguard consumers’ health while minimizing the impact on the environment. Insufficient air flow inside the system may damage the motherboard components.

Do not forget to connect the fan cables to the fan connectors. Setting to Auto allows automatic selection of the appropriate IDE device type. Personalize your system with customizable boot logo You can convert your favorite photo into a color boot logo for a more colorful and vivid image on your screen.

ASUS P5KPL-AM EPU – motherboard – micro ATX – LGA775 Socket – G31 Series

If you install a PCI graphics card, we recommend that you remove the onboard graphics card driver. Use of a PSU with a higher power output is recommended when configuring a system with more power-consuming devices. Hence, a total installed memory of less ln 3GB is recommended. Assign an IRQ to the card.


Asus P5KPL-AM IN GB User Manual

Otherwise, conflicts will arise between the two PCI groups, making the system unstable and the card inoperable. Q-Fan ASUS Q-Fan technology intelligently and automatically adjusts CPU fan speeds according to system load and temperature, enabling users to work in a distraction-free asuw with minimal noise.

Ij a community-based project which helps to repair anything. In 4-channel and 6-channel configuration, the function of this port p5kpll-am Front Speaker Out. Align the card connector with the slot and press firmly until the card is completely seated on the slot. The contents of the support DVD are subject to change at any time without notice. Dual-channel DDR2 technology doubles the bandwidth of your system memory and hence boost the system performance to out perform any memory existing solutions in the market.

Page 2 Product warranty or service will not be extended if: